 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Aluminum Electrolytic Capacitors/ ED Snap-in Type Series: ED Type: TS Features Endurance : 105 C 3000 h High ripple current capability in high frequency range. RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan -40 C to + 105 C 200 V.DC to 250 V.DC 220 F to 2200 F 20 % (120 Hz/+20 C) 3 CV (A) max. After 5 minutes application of rated working voltage at +20 C C : Capacitance (F) V: W.V. (V.DC) 120 0.70 500 0.85 1k 0.90 10 k to 1.00 -25 C to +105 C 400 V.DC to 450 V.DC 56 F to 560 F Please see the attached standard products list Frequency (Hz) 50 60 100 Frequency Correction Factor for Ripple Current Correction Factor 0.5 0.55 0.68 After 3000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105 C2 C, the capacitors shall meet the following limits. Endurance Capacitance change <20 % of initial measured value tan < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C within no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Shelf Life Dimensions in mm (not to scale) Polarity bar Sleeve (1 (mm) 2-2.00.1 0.0 ) 10 .0 0.1 D+1.0 max. Vent L+2.0 max. Rated voltage etc. indicate to sleeve. 4.00.5 (D) Recommended PWB piercing plan 0.8 -0.1 (3.5) 4.00.5 +0.2 2.0 max. Terminal (t=0.8) 1.50.2 Top of spin Standard terminal type does not require terminal trimming process. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ ED Standard Products Case size W.V. Cap. (120 Hz) (20 %) (F) 270 330 390 470 560 Dia. (mm) 22 22 22 25 22 25 22 25 30 22 25 30 22 25 30 35 25 30 35 30 35 30 35 35 35 22 22 25 22 25 22 25 30 22 25 30 25 30 35 25 30 35 30 35 30 35 35 35 Length (mm) 25 30 30 25 35 30 40 30 25 45 35 30 50 40 30 25 45 35 30 40 35 50 40 45 50 30 30 25 35 30 40 30 25 45 35 30 40 30 25 45 35 30 40 35 45 40 45 50 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETED2D271HJ EETED2D331HJ EETED2D391HJ EETED2D391JJ EETED2D471HJ EETED2D471JJ EETED2D561HJ EETED2D561JJ EETED2D561KJ EETED2D681HJ EETED2D681JJ EETED2D681KJ EETED2D821HJ EETED2D821JJ EETED2D821KJ EETED2D821LJ EETED2D102JJ EETED2D102KJ EETED2D102LJ EETED2D122KJ EETED2D122LJ EETED2D152KJ EETED2D152LJ EETED2D182LJ EETED2D222LJ EETED2Q271HJ EETED2Q331HJ EETED2Q331JJ EETED2Q391HJ EETED2Q391JJ EETED2Q471HJ EETED2Q471JJ EETED2Q471KJ EETED2Q561HJ EETED2Q561JJ EETED2Q561KJ EETED2Q681JJ EETED2Q681KJ EETED2Q681LJ EETED2Q821JJ EETED2Q821KJ EETED2Q821LJ EETED2Q102KJ EETED2Q102LJ EETED2Q122KJ EETED2Q122LJ EETED2Q152LJ EETED2Q182LJ Specification Ripple tan Current (120 Hz) (50 kHz) (+20 C) (+105 C) max. (A r.m.s.) 2.03 0.15 2.23 0.15 2.44 0.15 2.44 0.15 2.64 0.15 2.64 0.15 3.05 0.15 3.05 0.15 3.05 0.15 3.45 0.15 3.45 0.15 3.45 0.15 3.76 0.15 3.76 0.15 3.76 0.15 3.76 0.15 4.06 0.15 4.06 0.15 4.06 0.15 4.47 0.15 4.47 0.15 5.08 0.15 5.08 0.15 5.48 0.15 5.89 0.15 2.03 0.15 2.23 0.15 2.23 0.15 2.44 0.15 2.44 0.15 2.64 0.15 2.64 0.15 2.64 0.15 3.05 0.15 3.05 0.15 3.05 0.15 3.45 0.15 3.45 0.15 3.45 0.15 3.76 0.15 3.76 0.15 3.76 0.15 4.06 0.15 4.06 0.15 4.47 0.15 4.47 0.15 5.08 0.15 5.48 0.15 Min. Packaging Q'ty (V. DC) 680 200 820 1000 1200 1500 1800 2200 270 330 390 470 560 220 680 820 1000 1200 1500 1800 (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 Endurance : 105 C 3000 h Terminal Pitch : 10 mm When capacitors of 35 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ ED Standard Products Case size W.V. Cap. (120 Hz) (20 %) (F) 220 270 330 390 Dia. (mm) 22 22 25 22 25 22 25 30 22 25 30 25 30 35 25 30 35 30 35 30 35 35 35 22 22 25 22 25 22 25 30 22 25 30 22 25 30 35 25 30 35 30 35 30 35 35 35 Length (mm) 30 30 25 35 30 40 30 25 45 35 30 40 30 25 45 35 30 40 35 50 40 45 50 25 30 25 35 30 40 30 25 45 35 30 50 40 30 25 45 35 30 40 30 45 35 40 45 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETED2E221HJ EETED2E271HJ EETED2E271JJ EETED2E331HJ EETED2E331JJ EETED2E391HJ EETED2E391JJ EETED2E391KJ EETED2E471HJ EETED2E471JJ EETED2E471KJ EETED2E561JJ EETED2E561KJ EETED2E561LJ EETED2E681JJ EETED2E681KJ EETED2E681LJ EETED2E821KJ EETED2E821LJ EETED2E102KJ EETED2E102LJ EETED2E122LJ EETED2E152LJ EETED2G820HJ EETED2G101HJ EETED2G101JJ EETED2G121HJ EETED2G121JJ EETED2G151HJ EETED2G151JJ EETED2G151KJ EETED2G181HJ EETED2G181JJ EETED2G181KJ EETED2G221HJ EETED2G221JJ EETED2G221KJ EETED2G221LJ EETED2G271JJ EETED2G271KJ EETED2G271LJ EETED2G331KJ EETED2G331LJ EETED2G391KJ EETED2G391LJ EETED2G471LJ EETED2G561LJ Specification Ripple tan Current (120 Hz) (50 kHz) (+20 C) (+105 C) max. (A r.m.s.) 1.83 0.15 2.03 0.15 2.03 0.15 2.23 0.15 2.23 0.15 2.44 0.15 2.44 0.15 2.44 0.15 2.64 0.15 2.64 0.15 2.64 0.15 3.05 0.15 3.05 0.15 3.05 0.15 3.45 0.15 3.45 0.15 3.45 0.15 3.76 0.15 3.76 0.15 4.06 0.15 4.06 0.15 4.47 0.15 5.08 0.15 1.14 0.15 1.30 0.15 1.30 0.15 1.46 0.15 1.46 0.15 1.53 0.15 1.53 0.15 1.53 0.15 1.60 0.15 1.60 0.15 1.60 0.15 2.03 0.15 2.03 0.15 2.03 0.15 2.03 0.15 2.23 0.15 2.23 0.15 2.23 0.15 2.44 0.15 2.44 0.15 2.64 0.15 2.64 0.15 2.84 0.15 3.05 0.15 Min. Packaging Q'ty (V. DC) 470 250 560 680 820 1000 1200 1500 82 100 120 150 180 400 220 270 330 390 470 560 (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 Endurance : 105 C 3000 h Terminal Pitch : 10 mm When capacitors of 35 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ ED Standard Products Case size W.V. Cap. (120 Hz) (20 %) (F) 68 82 100 120 150 Dia. (mm) 22 22 25 22 25 22 25 22 25 30 22 25 30 35 25 30 35 25 30 35 30 35 30 35 35 22 22 25 22 25 22 25 22 25 30 22 25 30 35 22 25 30 35 25 30 35 30 35 30 35 35 35 Length (mm) 25 30 25 30 25 35 30 40 35 25 45 40 30 25 45 35 30 50 40 30 45 35 50 40 45 25 30 25 30 25 35 30 40 35 25 45 40 30 25 50 40 30 25 45 35 30 40 35 50 40 40 50 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETED2S680HJ EETED2S820HJ EETED2S820JJ EETED2S101HJ EETED2S101JJ EETED2S121HJ EETED2S121JJ EETED2S151HJ EETED2S151JJ EETED2S151KJ EETED2S181HJ EETED2S181JJ EETED2S181KJ EETED2S181LJ EETED2S221JJ EETED2S221KJ EETED2S221LJ EETED2S271JJ EETED2S271KJ EETED2S271LJ EETED2S331KJ EETED2S331LJ EETED2S391KJ EETED2S391LJ EETED2S471LJ EETED2W560HJ EETED2W680HJ EETED2W680JJ EETED2W820HJ EETED2W820JJ EETED2W101HJ EETED2W101JJ EETED2W121HJ EETED2W121JJ EETED2W121KJ EETED2W151HJ EETED2W151JJ EETED2W151KJ EETED2W151LJ EETED2W181HJ EETED2W181JJ EETED2W181KJ EETED2W181LJ EETED2W221JJ EETED2W221KJ EETED2W221LJ EETED2W271KJ EETED2W271LJ EETED2W331KJ EETED2W331LJ EETED2W391LJ EETED2W471LJ Specification Ripple tan Current (120 Hz) (50 kHz) (+20 C) (+105 C) max. (A r.m.s.) 1.08 0.15 1.14 0.15 1.14 0.15 1.30 0.15 1.30 0.15 1.46 0.15 1.46 0.15 1.53 0.15 1.53 0.15 1.53 0.15 1.60 0.15 1.60 0.15 1.60 0.15 1.60 0.15 2.03 0.15 2.03 0.15 2.03 0.15 2.40 0.15 2.40 0.15 2.40 0.15 2.54 0.15 2.54 0.15 2.73 0.15 2.73 0.15 3.18 0.15 0.95 0.15 1.08 0.15 1.08 0.15 1.14 0.15 1.14 0.15 1.30 0.15 1.30 0.15 1.46 0.15 1.46 0.15 1.46 0.15 1.53 0.15 1.53 0.15 1.53 0.15 1.53 0.15 1.60 0.15 1.60 0.15 1.60 0.15 1.60 0.15 2.03 0.15 2.03 0.15 2.03 0.15 2.45 0.15 2.45 0.15 2.64 0.15 2.64 0.15 2.82 0.15 3.53 0.15 Min. Packaging Q'ty (V. DC) 420 180 220 270 330 390 470 56 68 82 100 120 150 450 180 220 270 330 390 470 (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 Endurance : 105 C 3000 h Terminal Pitch : 10 mm When capacitors of 35 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 |
Price & Availability of EETED2W391LJ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |